Multi Metallographic Mount Holder, 1-1/4

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Multi Metallographic Mount Holder, 1-1/4" and 30-32mmDESCRIPTION Multi Metallographic Mount Holder, 1 1 4" and 30 32mmSpecimen holder for 3 x 1 1 4" and 30 32mm metallographic mounts. Holder height is 0. 41" (10. 4mm), with recessed areas 0. 31" (7. 9mm) deep. Open sides for easier sample removal. Material: machined aluminum with stainless steel allen screws. Allen wrench included. Shown holding two metallographic mounts (not included). Screws used are M3 x 6mm Soc Cap, SS and M3 x 12mm Soc Cap, SS

Good bonding properties on most materials

4-3/4" (120mm)

mounted on a 200M Ni grid

Type <100>

5377-NM PELCO Reverse

40 concave recesses

Diameter of holder is 35mm (1-3/8")

FIB: Can be used for a wide range of accelerating voltage (<1kV-30kV) and calibrates images from 5kX to 200kX

The stick is 4mm wide by 75mm long and has a slot along its center with small undercut notches on one side to make grid removal simple

Pin mount adapter

21330-25 - Substratek™

flat accurate round tips 2A 120mm NM-SS 1